Rotex Controller Series User Manual

EbV Product documentation THETA NORM/UNIT
9-6
9.2.3 Bus priority heating circuit
Function: This setting serves to determine the privilege status of a room station connected to
a heating circuit. One parameter per available heating circuit is available for this
setting.
Possible setting: Simple access
Only switching times and parameters of the own heating circuit can be read and
modified. When accessed, only the data for his own heating circuit is displayed for
the respective user.
Application: Tenant status
Extended access
This access status allows access to all heating circuits and to the hot water circuit
and their parameters and switching times within the respective standard unit.
Application: Landlord status
NOTE: Once a room device is connected and registered via the data bus to the standard
unit, the standard unit automatically switches to separate operating mode! This is
necessary to ensure clear operation of the system with connected room devices.
Operation:
Note on operation Key / parametertree Parameter
Setting bus address DATA BUS PARAMETER 02
or
PARAMETER 03
or
PARAMETER 04
Control mode SYSTEM CONTROL MODE

Rotex Controller Series Specifications

General

Brand	Rotex
Model	Controller Series
Category	Controller
Language	English