Rotex Controller Series User Manual

EbV Product documentation THETA NORM/UNIT
12-7
6- Insert standard unit with evenly distributed pressure. The electrical
connection is done by plugging the instrument into the terminals at the
socket print. Lock standard unit with both quick clamping devices left and
right.
NOTE! Cables with mains voltage must be installed separate from low voltage cables (data
bus, sensors etc.). It is strictly prohibited to use one cable for both voltages. Use
cable ducts equipped with separators, if necessary.

Rotex Controller Series Specifications

General

Brand	Rotex
Model	Controller Series
Category	Controller
Language	English