Roto Patio Fold - Page 4

4  April 2015  IMO_374_EN_v1 Roto Patio Fold Subject to change.
Installing the sash hinge-bearing ............................................................... 50
Connecting folding sashes to each other ................................................... 52
Frame ............................................................................................ 54
Installing roller track and guide track ......................................................... 54
Installing roller track with roll-support ....................................................... 55
Drill the drainage drill-holes. ...................................................................... 56
Installing contour-milled frame .................................................................. 57
Installing the frame counter-routed............................................................ 61
Supporting the roller track and the enhanced threshold ............................ 63
Inserting the bogie ..................................................................................... 64
Installing the frame hinge-bearing ............................................................. 65
Drilling and routing dimensions, surrounding frame .................................. 66
Connecting sash and frame ........................................................... 67
Hinging the sash ........................................................................................ 67
Installing and securing flush-encased gearbox...............................69
Advice on the use of glazing packers ............................................. 70
Frontal view support bracket ..................................................................... 70
Accessories ................................................................................... 71
Installing the sash retaining device ............................................................ 71
Installing the sash stop .............................................................................. 72
Installation drawings
Dimensions and positioning ........................................................... 73
Adjustment
Explanation on the adjustment chapter .......................................... 74
Bogie/hinge .................................................................................. 75
Gasket compression, height/lateral adjustment ....................................... 75
Corner hinge/Sash stay ................................................................ 76
Lateral/height adjustment Tilt&Turn/Turn-Only sash .............................. 76
Locking cam .................................................................................. 77
Gasket-compression adjustment Tilt&Turn/Turn-Only sash ..................... 77
Gasket-compression adjustment enhanced threshold ............................... 78
Operation
Operating information .................................................................... 79
Maintenance
Maintenance .................................................................................. 80
Lubrication points Roto AL ............................................................ 81
Inspection and care ....................................................................... 82
Preservation of the surface finish .................................................. 83
General information
Contents