Need help?Do you have a question about the Roto Patio Fold and is the answer not in the manual?
Details the content and scope of the manual, including related documents and guidelines.
Identifies and describes the intended audience and their responsibilities.
Outlines the requirements for transmitting information to subsequent parties.
Defines the meaning of various safety symbols used throughout the manual.
Specifies conditions and circumstances under which the manufacturer is not liable.
Defines the correct and intended application of the hardware system.
Details how end-users should correctly operate the window and balcony doors.
Provides critical safety warnings and symbols for safe operation and installation.
Specific safety advice and symbols tailored for end-users of the hardware.
Guidance for manufacturers on aspects like sash sizes, weights, and profile specifications.
Instructions and warnings related to the secure fixing and clamping of hardware components.
Overview of the main features, standard colours, and capabilities of the Roto Patio Fold hardware.
Explains the meaning of alphanumeric codes used in diagrams for sash configurations.
Illustrates different system configurations based on frame types and thresholds.
Introduces the structure of the hardware overview section, detailing component layouts and parts lists.
Diagram showing the layout of hardware components for the standard roller track version.
Lists all components, colours, and material numbers for the standard roller track hardware.
Diagram showing the hardware component layout for the enhanced threshold version.
Lists components, colours, and material numbers for the enhanced threshold hardware.
Details compatibility of hardware with different profile systems, including hinge specifications.
Lists specialized tools and jigs required for the precise installation of hardware components.
Provides precise measurements and guidelines for drilling and routing on profiles.
Detailed steps for predrilling required holes for sash and frame hinges.
Instructions on how to predrill the support bracket for correct mounting.
Step-by-step guide for attaching the top support bracket to the sash.
Instructions for mounting the support bracket for the bottom roller track.
Procedure for attaching the support bracket to the bottom enhanced threshold.
Guide for fitting the hinge-bearing onto the sash, including cover plate placement.
Steps for inserting and fixing the sash hinge onto the hinge-fixing insert.
Procedure for connecting multiple folding sashes together using pins and bolts.
Instructions for fitting the roller and guide tracks onto the frame.
Guidance on installing the roller track, including the optional roll-support accessory.
Procedure for drilling drainage holes in the frame to remove water.
Steps for installing the threshold and related components on a contour-milled frame.
Instructions for fitting the threshold and bracket on a counter-routed frame.
Guidance on using packers to support roller tracks and enhanced thresholds on the floor.
Procedure for inserting the bogie into the roller track.
Steps for mounting the frame hinge-bearing, including spacer selection.
Specific drilling and routing details for the surrounding frame components.
General steps for connecting the sash to the frame, ensuring proper alignment.
Procedure for hinging the sash onto the frame assembly.
Instructions for fitting and securing the flush-encased gearbox mechanism.
Guidance on the correct placement and use of glazing packers for support.
Steps for installing the sash retaining device to secure the sash.
Procedure for mounting the sash stop in the guide track.
Detailed diagrams illustrating dimensions and correct positioning for installation.
Introduces the symbols and general notes for sash adjustment procedures.
Details on how to adjust the bogie and hinge for gasket compression, height, and lateral play.
Instructions for lateral and height adjustments of corner hinges and sash stays.
Guidance on adjusting the locking cam for gasket compression on Tilt&Turn/Turn-Only sashes.
Instructions for adjusting the gasket compression using the V cam on enhanced thresholds.
Explains handle positions and corresponding sash states for opening Fold&Slide doors.
General recommendations for annual maintenance tasks for hardware components.
Illustrates the locations for lubricating Roto AL hardware components.
Guidelines for inspecting hardware security and regular cleaning procedures.
Advice on protecting hardware surfaces against corrosion and dirt.
Step-by-step instructions on how to safely remove a sash from its hinges.
Guidelines for safe handling, packaging, and storage of window elements.
Instructions for checking deliveries for completeness and transport damage upon receipt.
Recommendations for environmentally sound disposal of hardware components.
General| Foldable | Yes |
|---|---|
| Type | Patio Door |
| Application | Patio Doors |
| Material | Steel, Aluminum, Plastic |
| Frame Material | Aluminum, PVC |
To Next Page
