Royal 240DX - Using the Clerk System; Setting Manager Passwords

Royal 240DX User’s Guide
30
6 Follow the instructions on the display. Now you need to turn on Clerk System
(Default is on).
To turn on Clerk System
PROGRAM SETTING CLERK SETTING
1 Press the press the SUB/ESC key.
2 Press the Arrow Down key to select PROGRAM SETTING. Press the
CASH/Enter key.
3 If you are prompted for a Manager Password, type the Password number and then
press the CASH/Enter key. If you did not program a Manager Password, go to
the next step.
4 Press the Arrow Down key to select CLERK SETTING. Press the
CASH/Enter key.
5 Press the Arrow Down key to select Clerk Active. Press the CASH/Enter key.
Using the Clerk System
If the clerk system is active, the clerk is prompted to enter the clerk Password when
they enter the Sales Registration mode.
To use the clerk system
1 Plugging the Cash Register into a power source.
2 If prompted for a Password, use the round Number keys and press the one-four
digits Password. Then press the CASH/Enter key.
Setting Manager Passwords
Manager Passwords are available for added security:
• to go to the PRG and Z modes
• to go to the X mode.
Caution
Write your Passwords down in a safe place. If you forget the Passwords,
you must do a Full System Clear procedure. A Full System Clear erases all
transaction information and PROGRAM SETTING. For details on the Full
System Clear, see Full System Clear on page 97.