Royal 240DX User’s Guide
52
If you are a smaller merchant or business, you may not need to print customer
receipts. This controls the amount of receipt paper you use. In this case, you do not
print a receipt for every transaction and only print a receipt for those transactions
where one is required.
You must have paper installed in the cash register even if you have customer
receipt printing off and are not printing receipts.
You can see the receipt printer is turned off by looking at the clerk screen. If you see
the (OFF) symbol, receipts are not automatically printed.
Note
You cannot change printing receipts in the middle of a transaction.
To turn printing receipt on or off
1 End any transaction.
2 Do one of the following:
• To turn receipt printing off, input 00and press the SUB/ESC key. The (OFF)
symbol appears on the clerk screen.
• To turn receipt printing on again, input 11and press the SUB/ESC key. The
(ON) symbol appears from the clerk screen.
Receipt on Demand
If the receipt printer is turned off, you can still print a receipt on demand if the
customer requests one after the transaction is completed but before you start another
transaction.
To print a receipt after a transaction is complete, press the CASH/Enter key
Using Training Mode
We provide examples to help learn how to use this cash register. Using the
examples can help you learn to use the cash register and the available features.
You can enter the Training mode at any time in the REGISTER mode because it does
not record activity in the machine totals. However, you cannot enter Training mode
in the middle of a transaction. Complete any transactions, running reports, or
programming before you enter Training mode.
When you are using the cash register in Training mode, you cannot use any of the
operations in the PRG, X, or Z modes. The transaction numbers and amounts do
not count in the Register mode until you exit Training mode.
To Next Page
