71
Ocean 2014 - Main screen
2014-06-02/3.2A
Ocean 2014 User's Manual
Auto-close position check
If checked, position check closes automatically when it is successful.
Enable auto-start with
USB
If checked, Ocean 2014 starts automatically when meter is connected
with USB. Ocean 2014 exits automatically when meter is disconnected
or powered off.
Always show extended
meter settings
If checked, all meter settings are always visible on the Meter Adjust
tabs and you don't need to click on the More button to see all
settings.
Defaults - These settings control functions within Ocean 2014 related to measurements and
templates
These are the settings that will be the defaults related to measurements.
Reference temperature used when calculating the TP-factor for ion
chambers.
Reference pressure used when calculating the TP-factor for ion
chambers.
Default inspection interval
Default inspection interval (months) for room.
Default units - These settings control functions within Ocean 2014 related to measurements and
templates
These are the default units, they can be changed "locally" in each template.
To Next Page
Loading...
Need help?
General
