Sagem RT3000 - Page 109

Parameters in the file para.ini: advanced configuration
108 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
[PSTN_SMS]
SMS_PROTOCOL=1
PSTN_SMS_CENTER=0193010
RING_TIMEOUT=600
DELIVERY_DELAY=3000
ERROR_REPORT=YES
;*** special parameters for protocol 1
DELIVERY_MODE=0
SMSC_HEADER=NO
;pdu-protocol-identifier to default
;SET_DEFAULT_PI=YES
ACK_INFO=YES
;max 20 characters
;ACK_PAYLOAD=
;*** special parameters for protocol 2
;send more than one msg at the same session
ALL_MSG_AT_ONCE=NO
LOCAL_NUMBER=900716800
[BILLING]
;settings for channel a
CHA_BILLING_ENABLED=NO
CHA_PULSE_DURATION=20
CHA_PULSE_DELAY=100
CHA_PULSE_LEVEL=1
;12kHz and 16kHz. default: 16kHz
CHA_16KHZ_BURST=YES
;settings for channel b
CHB_BILLING_ENABLED=NO
CHB_PULSE_DURATION=20
CHB_PULSE_DELAY=100
CHB_PULSE_LEVEL=1
;12kHz and 16kHz. default: 16kHz
CHB_16KHZ_BURST=YES
[CLIP]
;settings for channel a
CHA_CLIP_ENABLED=YES
CHA_RING_CLIP_DELAY=50
CHA_SEIZURE_BITS=300
CHA_MARK_BITS=180
;settings for channel b
CHB_CLIP_ENABLED=YES