Sagem RT3000 - Page 110

Parameters in the file para.ini: advanced configuration
SAGEM RT3000 109
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
CHB_RING_CLIP_DELAY=50
CHB_SEIZURE_BITS=300
CHB_MARK_BITS=180
[FLASH]
;settings for channel a
CHA_FLASH_MIN=7
CHA_FLASH_MAX=50
;settings for channel b
CHB_FLASH_MIN=7
CHB_FLASH_MAX=50
[RING]
;settings for channel a, 25Hz and 50Hz available, default: 25Hz
CHA_HIGH_RING_FREQ=NO
;settings for channel b, 25Hz and 50Hz available, default: 25Hz
CHB_HIGH_RING_FREQ=NO
[DIALING]
;settings for channel a
;AUTO, REAL600, REAL900, COMPLEX
CHA_INPUT_IMPEDANCE=COMPLEX
CHA_POLARITY_REV=NO
CHA_MTC_HOOK_DELAY=NO
CHA_MTC_HOOK_TIMEOUT=6000
CHA_FAST_DIAL=NO
CHA_DIAL_TIMEOUT=600
CHA_LOCAL_CALL_WAIT=NO
CHA_LOCAL_CALL_CTRL=NO
CHA_TX_VOICE_LEVEL=-7
CHA_RX_VOICE_LEVEL=-7
;settings for channel b
CHB_INPUT_IMPEDANCE=COMPLEX
CHB_POLARITY_REV=NO
CHB_MTC_HOOK_DELAY=NO
CHB_MTC_HOOK_TIMEOUT=6000
CHB_FAST_DIAL=NO
CHB_DIAL_TIMEOUT=600
CHB_LOCAL_CALL_WAIT=NO
CHB_LOCAL_CALL_CTRL=NO
CHB_TX_VOICE_LEVEL=-7
CHB_RX_VOICE_LEVEL=-7