Sagem RT3000 - Page 77

For experienced Users: AT commands
76 SAGEM RT3000
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
AT+KSTIS – Retrieve the icon
AT+KSTIS
Sets the parameters
Response:
+KSTIS:<num>,<details1>[,...<detailsi>]
OK
Values for:
<icon id> Integer type; icon identifier of the icon
<num> integer type; number of instances for this
icon
<details1>...<detailsi>
String type in (HEX format)
instance number
image instance width (in pixel)
image instance height (in pixel)
image coding scheme ('11', '21' ...)
length of image instance data (in bytes)
AT+KSTP – Profile supported by DTE
AT+KSTP=? Test command
Response:
+KSTP:<support>,<setup profile>
OK
AT+KSTP? Read command
Response:
+KSTP:<current profile>,<default profile>
OK
AT+KSTP=<support>[,<DTE profile>]
Write command
Response:
OK
Values for:
<support>
0 No SIM Application Toolkit support
1 SIM Application Toolkit support
<xxx profile> Profile in HEX format