Sagem RT3000 - Page 78

For experienced Users: AT commands
SAGEM RT3000 77
Datei 8115AD002-Total.doc
Datei gespeichert 24.04.04 13:23 von EDV/ORGA
Druckzeit 24.04.04, 18:17
Status Release
AT+KSTR – Terminal Response
AT+KSTR=? Test command
Response:
+KSTR:(list of supported <type of responses>
OK
AT+KSTR=<type of response>,<TLVs> Write command
Response:
OK
Values for:
<type of response>
0 final response
(other values will be added later)
<TLVs> TLVs in HEX format
AT+KSTV – Envelope command
AT+KSTV=<envelope> Sets the parameter.
Response:
OK
Values for:
<envelope> TLVs in HEX format