104 • Program Mode SAM4S ER-230EJ Manual
Descriptor Code Method
If you customize your keyboard by covering key locations, or by installing double or quad
size keys, you will need to program descriptors using the descriptor code method. See
“SYSTEM” of “Options Programming” on page 133. You must set the “DESC. PGM
METHOD” option to be CODE TYPE.
Program Sequence
1. With the cursor pointed at a descriptor field, refer to the Descriptor Code Chart
below and type the code for the first character.
2. For each additional character, type the code. Each character will be displayed as
it is entered.
3. Press CASH when the descriptor is complete.
Program Example
To program the descriptor "APPLE", type:
[065] [080] [080] [076] [069] [CASH]
A P P L E
For DOUBLE (wide) characters enter 999 after the descriptor code. For example:
A
= [999] [065] [CASH]
To Next Page
Loading...
