SAM4S ER-230EJ Manual Program Mode • 137
Descriptors of menu, system and option can be
converted to the selected language automatically.
But Descriptors of Report, PLU, Group and etc
cannot be converted to the selected language.
Those descriptors can be changed only by user
programming.
PRINT options
Select N if you wish to delete the printing of the date.
Select N if you wish to delete the printing of the time.
If you are using more than one cash register, you can
identify the specific register where a receipt was
printed. Enter Y if you wish to print the register
number on the receipt.
Select N if you wish to delete the printing of the clerk
name on the receipt.
The consecutive number (also referred to as the
transaction counter, or receipt counter) normally
prints on each receipt. Select N if you do not wish to
print this counter.
Select Y if you wish to print a count of the number of
items on each receipt.
If Y, the PLU number and descriptor will print. If N,
only the PLU number will print.
Select Y if you wish to use Thousand Seperator.
Choose kind of thousand separator
PRINT RECEIPT WHEN
SIGN ON/OFF
Select N if you do not wish to print a receipt when
signing on or off a clerk.
Set to Y if you wish to issue only one copy of a
transaction receipt.
PRINT SUBTOTAL
WHEN PRESSED
Select Y if you wish the subtotal to print when the
SUBTOTAL key is pressed.
PRINT SUBTOTAL
WITHOUT TAX
If you hand-write credit card slips, you may find it
useful to print the merchandise subtotal. Select Y if
you wish to print the subtotal without tax on the
receipt.