Sam4s ER-230EJ - SYSTEM Options

SAM4S ER-230EJ Manual Program Mode • 133
Options - Reference Information
SYSTEM options
Option
Entry
Description
BEEPER ACTIVE
Y or N
Select N for a silent keyboard.
BEEPER ACTIVE IN
BATTERY MODE
Y or N
Select N for a silent keyboard and alarm in battery
mode.
CLERK ENTRY
PUSH,
CODE
Select PUSH for a push button clerk, select CODE
for a code entry clerk system (number - clerk or
clerk - number - clerk) sequence.
CLERK IS
STAY DOWN,
POP-UP
Select Y for pop-up clerks, select N for stay down
clerks. With pop-up clerks, you must sign on for
each transaction. With stay down clerks, the same
clerk remains signed on until sign off.
DECIMAL PLACE
0-3
Enter a digit to place the decimal point the selected
number of positions from the right.
DATE FORMAT IS
MMDDYY,
DDMMYY,
YYMMDD
Select date printing format.
DESC. PGM
METHOD
OVERLAY,
CODE
When OVERLAY TYPE, program descriptors by
pressing the appropriate key on the program
overlay. When CODE TYPE, program descriptors
by typing the code for each descriptor character.
DRAWER MUST BE
SHUT TO SALE
Y or N
Select Y to enforce closed drawer for register
operations.
ACTIVATE OPEN
DRAWER ALARM
Y or N
Select Y if you want the error tone to automatically
sound when the drawer stays open longer than the
time set in the following field.
DRAWER OPEN
TIME (0-99)
0-99
If you enable the open drawer alarm above, you
can set the length of time (1-99 seconds) before the
alarm sounds.
ALLOW POST
TENDER
Y or N
Select Y to allow re-tendering should a second
change calculation should be necessary. Re-enter
the tendered amount and press the CASH key to
show the new change computation.
OPEN DRAWER ON
POST TENDER
Y or N
If you enable post tendering, select N to not open
the cash drawer after the second tender.
GLOBAL ENTRY
LIMIT
(0-14)
0-14
Enter a digit to determine the number of numeric
digits that can be entered for any register function.
Enter 0 for no limit.