60 • Operations SAM4S ER-230EJ Manual
Not Found PLU List
Managers will typically use the “Not Found PLU list” as a tool to update the PLU file. A
list of up to 50 not found PLU items can be retained in the list. When capacity is reached,
you must RESET NOT FOUND PLU LIST.
To run a NOT FOUND PLU list, choose X REPORTS → PLU → NOT FOUND
PLU (selection #3) from the PLU REPORT menu
To run a Reset Not Found PLUs, choose NOT FOUND PLU (selection #3) from the
Z MODE menu.
To Next Page
Loading...
