Sam4s ER-230EJ - USB Setting

82 • Service Mode SAM4S ER-230EJ Manual
Serial Port Settings Screen Program Notes
Option
Description
BAUD RATE
Select 1200, 2400, 4800, 9600, 19200, 38,400,
57,600, or 115,200 from the screen, 9600 is default.
PARITY
Select NONE, EVEN or ODD, NONE is default.
DATA BITS
Select 8 or 7 from the screen, 8 is default.
STOP BITS
Select 1 or 2 from the screen, 1 is default.
DEVICE FUNCTION
Select NONE, PC, PRINTER, SCANNER, POLE or
SCALE from the screen, NONE is default.
PRINTER TYPE
Select the printer type connected to this port.
DISPLAY
Select the pole display type connected to this port.
KP START LINE (0-20)
Enter the number of KP START LINE.
KP END LINE (0-20)
Enter the number of KP END LINE.
SLIP START LINE (0-20)
Enter the number of SLIP START LINE.
USB Setting
1. At the SERVICE MODE, press 5 and CASH for DEFINE PORT.
2. From the DEFINE PORT screen, press 3 and CASH for USB TYPE.
3. Press the ↑ key and the ↓ key to select usb type and press the CASH key to
confirm
DEVICE: MEMORY
MEMORY
Note: If you select other types, Your ER-230EJ will be rebooted by itself.
USB Specifications
USB TYPE
USB VERSION
SPEED
PC-COM
For connecting PC
-
-
SCANNER
For using scanner
USB 2.0
(only HID type)
FULL SPEED
only
MEMORY
For backup & restore
USB 2.0
FULL SPEED