Sam4s ER-230EJ - Mode Key

20 • Introduction SAM4S ER-230EJ Manual
Mode Key
Mode Select Method
The Mode key can be changed by either pressing the key until the indicator is shown under
the correct mode on the display
• To select register press the MODE key until the display shows an indicator under REG
MODE
Fast Track Method
Uses the fast track method by entering the number of the mode required and press the
mode key. i.e.
• To select Register Mode using the fast track method enter 3 for REG and press the
MODE key
MODE
3
NUMBER
MODE
1
VOID MODE (VOID)
2
OFF MODE (OFF)
3
REGISTER MODE (R)
4
MANAGER MODE (X)
5
Z MODE (Z)
6
PROGRAM MODE (P)
7
SERVICE MODE (S)
Back-light On/Off
You can control the back-light with MODE key.
1
0
0
MODE
Turning on or off the back-light. It will be toggled.