Sam4s ER-230EJ - TRAIN MODE Options

146 • Program Mode SAM4S ER-230EJ Manual
Option
Entry
Description
PRINT SMALL FONT
EJ REPORT
Y or N
Select Y to print small font on EJ report.
TRAIN MODE options
Option
Entry
Description
OPEN DRAWER IN
TRAIN MODE
Y or N
Select N if you do not want the cash drawer to open
during training mode operations.
PRINT TRAIN MODE
TITLE
Y or N
When in training mode, the message "TRAIN
MODE" normally prints on each receipt. Select N if
you wish to delete this message.
SEND TO KP IN
TRAIN MODE
Y or N
You can choose whether to print or not print
registrations in training mode on kitchen requisitions.
TRAIN P/W
6 DIGIT
If you wish to use training mode, you must program a
password that you will use to enter training mode.
The password may be up to 6 digits.
PRT TRAIN CLERK
START/END MESSAGE
Y or N
Select N if you do not wish to print a message of train
clerk start or end.