Sam4s ER-230EJ - ECR Setup

SAM4S ER-230EJ Manual Service Mode • 83
ECR Setup
1. From SERVICE MODE, press 6 and CASH for ECR SETUP screen
displays:
ECR SETUP
1. ROM INFO
2. Press the ↑ key and the ↓ key for selecting value. Press CASH to confirm
the option value and return menu.
ECR SETUP
1. ROM INFO
2. PRINT DENSITY
3. LCD CONTRAST
Print Density
1. From ECR SETUP menu, press 2 and CASH to program ‘PRINT DENSITY’
screen:
PRINT DENSITY
UP,DOWN / END : CASH
2. Press the ↑ key and the ↓ key for selecting value. Press CASH to confirm
the density level and return to the ECR SETUP menu.
LCD Contrast for 16-Character LCD
1. From ECR SETUP menu, press 3 and CASH to program ‘LCD
CONSTRAST’ screen:
2. Press 1 and CASH key for Customer Rear Display (Two Line).
3. During check Customer Rear Dipslay press the ↑ key and the ↓ key to
change constrast. Press CASH to confirm and return to the ECR SETUP menu.