Sam4s ER-230EJ - BARCODE Options; EJ Options

SAM4S ER-230EJ Manual Program Mode • 145
BARCODE options
Option
Entry
Description
BARCODE TYPE
NONE
PRICE
WEIGHT
Select bar code type.
LENGTH OF FIELD1
PLU CODE
4-6
Select length of PLU code.
LENGTH OF PRICE OR
WEIGHT
4-6
Select length of price or weight.
DECIMAL NUM. FOR
WEIGHT
0-3
Select decimal number of weight.
BAR WEIGHT TYPE
LB
KG
OZ
Choose wetight type.
EJ options
Option
Entry
Description
ELECTRONIC
JOURNAL ENABLE
Y or N
Select Y to enable the electronic journal. The
electronic journal captures in memory what you would
print line by line on a traditional journal. The four
options that follow control the electronic journal
feature. The electronic journal can be printed in the
REPORT MODE reset in the Z MODE.
PROMPT WHEN E.J.
BUFFER IS FULL
Y or N
If the electronic journal is enabled above, select Y if
you wish to display a message to notify the operator
when the journal memory is full.
STOP OPERATIONS
WHEN E.J. BUFFER
IS FULL
Y or N
If the electronic journal is enabled above, select Y if
you wish to stop operations when the journal memory
is full.
SEND ONLY
NEGATIVE ENTRIES
TO E.J.
Y or N
If the electronic journal is enabled above, select Y if
you wish to capture only transactions with negative
entries.
SEND RESET
REPORT TO E.J
Y or N
If the electronic journal is enabled above, select Y if
you wish to capture reset reports.
E.J PRINTING
NEW
OLD
NEW: Prints electronic journal from lowest
consecutive number to highest.
OLD: Prints electronic journal from highest
consecutive number to lowest.
E.J PORT (0-2)
0-2
Choose a port for a remote printer to print electronic
journal reports instead of the register printer.