Sam4s ER-230EJ - Stock Entry

SAM4S ER-230EJ Manual Manager Mode (X Mode) • 67
Stock Entry
Note: Before program PLU stock, ‘Inventory Item’ option set as ‘Y’ in PLU
programming.
1. Press CASH to display the X MODE.
2. From the X MODE menu, press 5 and CASH for stock entry.
STOCK ENTRY
1. PROGRAM
ONE PLU
3. To program stock, press 1 and CASH key.
PROGRAM
1. ONE
4. Select the PLU or PLUs you wish to program one of the following ways.
5. From the PROGRAM screen, press 1 and CASH to add an individual PLU.
The PLU NUMBER screen display:
ENTER PLU #
0
RANGE PLU
3. From the PROGRAM screen, press 2 and CASH to display RANGE PLU
screen.
ENTER FROM PLU #
0
4. Enter FROM PLU# number to display TO PLU# screen:
ENTER FROM PLU #
1
ENTER TO PLU#
2
5. Select operator ADD, SUB or REPLACE.
OPERATOR: ADD(+)
ADD(+) ←