Sam4s ER-230EJ - Employee Programming

SAM4S ER-230EJ Manual Program Mode • 147
Employee Programming
1. At the PROGRAM MODE menu, press 5 and CASH for EMPLOYEE. The
CLERK NUMBER screen displays:
ENTER CLERK #
(1-10) 0
2. Press the clerk number and CASH.
3. Press the ↑ key and the↓ key to select menu and press the CASH key to confirm. Select
the Employee option you wish to program.
4. Press the ↑ key for YES and the ↓ key for NO. Press the CASH to confirm
the option value and return previous screen.
5. Press the CLEAR key to finalize and return to the ENTER CLERK# screen.
Clerk Programming - Reference Information
Option
Entry
Description
NAME
Alpha
numeric
16 character
You can program a descriptor for each clerk. The name you
program will print on the receipt in place of the default
CLERK #1-99. Type the descriptor using the Program
Overlay or by using the descriptor code method (see page
102.) The overlay is automatically activated when the
cursor is pointing at the DESC field.
PASSWORD
6 digit
number
If you are using a direct or code entry clerk system. The
number you set here is the number you must use to sign on
or clock in/out. If using an optional card reader, you must
swipe the employee card at this field.
TRAIN CLERK
Y or N
Set to Y if you wish to be train clerk.
ALLOW X
REPORTS
Y or N
If Y, you can use X Reports menu.
ALLOW Z MODE
Y or N
If Y, you can use Z mode.
ALLOW P MODE
Y or N
If Y, you can use P mode.
ALLOW S MODE
Y or N
If Y, you can use S mode.
ALLOW VOID
MODE
Y or N
If Y, you can use VOID mode.