Sam4s ER-230EJ - Cancel; VOID MODE Operations

SAM4S ER-230EJ Manual Operations • 49
Cancel
The CANCEL key allows you to stop any transaction. Anything registered within the
transaction before the CANCEL key is pressed is automatically corrected. The CANCEL
key can be deactivated through programming, see "Function Key Programming" in the
"Program Mode " chapter, or the key can be programmed to require manager control.
1. Register the items you wish to sell.
2. Press the CANCEL key.
CANCEL
THANK-YOU
CALL AGAIN
23/11/2015 MON 08:33
PLU1 T1 £2.29
PLU2 £1.50
CANCEL ***********************
CLERK 01 000011 00001
VOID MODE Operations
You can use the VOID MODE to correct any complete transaction. To correct any
transaction:
1. Move to the VOID MODE.
2. Enter the transaction you wish to
correct exactly as it was entered
originally in the REGISTER MODE.
You can enter discounts, voids,
returns, tax exemptions or any other
function.
3. All totals and counters are corrected as
if the original transaction did not take
place.
THANK-YOU
CALL AGAIN
23/11/2015 MON 08:33
********* VOID MODE *********
PLU1 T1 -2.29
PLU2 -1.00
TAX1 AMT -0.14
TOTAL -3.43
CASH -3.43
CLERK 01 000011 00001