Sam4s ER-230EJ - Flash Report; Training Mode

66 • Manager Mode (X Mode) SAM4S ER-230EJ Manual
Flash Report
You can view flash report on screen.
1. Press CASH to display the X MODE.
2. From the X MODE menu press 3 and CASH to display the FLASH REPORT.
The cash drawer opens.
GROSS SALES
0.00
3. At the FLASH REPORT screen, press ↑ key to view previous page and ↓
key to view next page.
GROSS SALES 0.00
NET SALE 0.00
CASH-IN- D 0.00
CHEQUE-IN- D 0.00
CHG1-IN- D 0.00
CHG2- IN-D 0.00
CHG3-IN- D 0.00
CHG4-IN- D 0.00
CHG5-IN- D 0.00
CHG6-IN- D 0.00
CHG7-IN- D 0.00
CHG8-IN- D 0.00
FD/S-IN- D 0.00
Training Mode
A training mode is available so that the register can be operated (to practice registrations)
without updating totals and counters. If you choose to use training mode, you must set a
training mode password (see “TRAIN MODE” of the “Options Programming” in the
"Program Mode " chapter.)
1. Press CASH to display the X MODE menu.
2. From the X MODE menu press 4 and CASH to enter or exit training mode:
SET TRAIN MODE
START:1 / END:0
3. The START TRAIN screen displays. To start training mode, type your
password and press CASH.