Sam4s ER-230EJ - Group Programming

114 • Program Mode SAM4S ER-230EJ Manual
Group Programming
Up to 99 groups (the exact number is determined by memory allocation) are available
to summarize PLU sales. Group totals appear on reports, so that you can track sales of
different types of items.
 The group descriptors programmed here will replace the default
descriptors GROUP 1 through GROUP 99 that appear on reports.
 Each PLU can report totals to one, two or three different groups. If a PLU
sends totals to more than one Group, the Group total that appears on the
Group report will not represent PLU sales. Therefore, you also have the
option of deciding whether each Group's total will add to the Group total
on the Group report.
To Program Groups
1. At the PROGRAM MODE, press 2 and CASH for GROUP. The GROUP
PROGRAMMING screen displays: (The maximum group number is set by
memory allocation.)
ENTER GROUP #
(1-10) 0
2. Enter the number of the group to be programmed, press the CASH. The
GROUP# PROGRAMMING screen displays:
GROUP
1. DESC: [GROUP01]
GROUP
1. DESC: [GROUP 01]
2. ADD TO GROUP TOTAL[Y]
3. SEND TO KP [N]
4. KP PORT#: RCPT [N]
5. KP PORT#: 1 [N]
6. KP PORT#: 2 [N]
7. PRINT RED ON KP [N]
3. Press the ↑ key and the↓ key to select menu and press the CASH key to
confirm. Select the Group option you wish to program.
4. Press the ↑ key for YES and the ↓ key for NO.
Press CLEAR to return to the GROUP PROGRAMMING screen. Continue to
program groups as necessary. Press CLEAR to return to the PROGRAM
MODE screen.