Sam4s ER-230EJ - Page 115

SAM4S ER-230EJ Manual Program Mode • 115
Group Programming - Reference Information
Option
Entry
Description
DESC
Alpha
numeric
24
character
You can program a descriptor for each group. Type
the descriptor using the Program Overlay or by using
the descriptor code method (see page 102.). The
overlay is automatically activated when the cursor is
pointing at the DESC field. The default descriptors
are GROUP 01, GROUP 02, etc.
ADD TO GROUP
TOTAL
Y or N
Select N if you do not wish this groups total to be
added to the total of all groups on the Group report.
SEND TO KP
Y or N
Select Y if you wish to send PLUs reporting to this
group to a kitchen printer.
KP PORT #: RECEIPT
Y or N
Select Y if you wish to print a kitchen requisition at
the register.
KP PORT #: 1
Y or N
Select Y if you wish to print a kitchen requisition at
the Port1.
KP PORT #: 2
Y or N
Select Y if you wish to print a kitchen requisition at
the Port2.
PRINT RED ON KP
Y or N
Select Y if you wish items reporting to this group to
print in red on the kitchen printer. (Note, the kitchen
printer must have red/black printing capability, and
this option does not apply to the register receipt
printer.)