Sam4s ER-230EJ - PLU Programming

SAM4S ER-230EJ Manual Program Mode • 107
PLU Programming
To accommodate UPC scanning, each PLU can be given an identifying number up to 14
digits in length.
1. At the PROGRAM MODE, press 1 and CASH for PLU Programming. The
PLU PROGRAMMING screen displays:
PLU
1. ADD/CHANGE
2. DELETE
3. PLU STOCK
4. NLU CODE# PGM
Add/Change PLU
Add/change One PLU
2. From the PLU PROGRAMMING screen, Press 1 and CASH to add or change
a PLU screen:
ADD/CHANGE
1. ONE PLU
2. RANGE PLU
3. Press 1 and CASH to select individual PLU. The PLU NUMBER screen
displays:
ENTER PLU #
0
4. Enter PLU number and CASH to select individual PLU.
5. Refer to "PLU Options - Reference Information" on page 108 to make program
entries or changes, press the CLEAR key to finalize and return to the previous
screen.
Add/change Range PLU
2. From the ADD/CHANGE screen, Press 2 and CASH to select RANGE PLU.
The PLU NUMBER screen displays:
ENTER FROM PLU #
0