Sam4s ER-230EJ - Page 86

86 • Service Mode SAM4S ER-230EJ Manual
Note: If you are Using an SD Card for the First Time . . .
NOTE: SD cards must be formatted as FAT 32.
CAUTION: Formatting the SD card will clear all data on the SD card and prepare it for
use.
1. Start Windows Explorer.
2. Select the SD card drive, right click and select Format. (Win XP screen shown; slightly
different procedures are used with different operating systems.)
3. From the Format dialog you must select the
File System: FAT32.
Select
“Format…”