SAM300 Reference Manual v1.0 PLU/Inventory Maintenance 21
PLU Data
The PLU Data tab contains the same options for each PLU that are available at the SPS-300.
Edits made here can be downloaded to the terminal. Refer to the SPS-300 Program Manual.
You must select EDIT PLU before you can change existing values.
Note: For double-wide characters hold down the Ctrl key, type W, then type the character
you wish to program. (Descriptor field only)
In addition to ECR PLU data, two additional fields are shown on this window:
Field Description
Margin of Profit (%)
Calculated from Avg unit cost and selling price.
Full Description
30 characters
To Next Page
Loading...
