SECTION III USE
Connection of an implement to the auxiliary hydraulic service cou-
plers
N.B. - the hydraulic couplers
have 1/2” female fittings that
allow connection under
pressure of the male fitting on
the implement hose. The
couplers are also designed to
disconnect automatically if
accidentally jerked.
Hydraulic services connections
IMPORTANT : check that
connection hoses are of
sufficient length to allow
unimpeded manoeuvring of the
tractor and implement.
To disconnect the hose, return
the distributor’s controls to
neutral position to release any
residual pressure from the
system, then pull the hose off.
Disconnecting a hose from the
hydraulic coupler
59
G=1/2
DANGER
WARNING
DANGER
DANGER: DO NOT ATTEMPT TO UNPLUG THE HYDRAULIC CON
-
NECTIONS, OR ADJUST AN IMPLEMENT WITH THE ENGINE
RUNNING OR THE P.T.O. DRIVE IN OPERATION. TO DO SO MAY RE
-
SULT IN VERY SERIOUS INJURY OR DEATH.
WARNING: KEEP THE TRACTOR LOCKED, USING A CHOCK, WHEN
PARKING ON SLEEP GROUND, REPAIRING OR MAINTENANCE OP-
ERATING.
To Next Page
Loading...
Need help?
General
