SECTION III USE
Auxiliary hydraulic services control valve
The auxiliary hydraulic services control valve enables the control of
external implements with hydraulic rams and motors, meeting the
operating requirements for all applications.
53
WARNING: CONTROL LEVER MUST BE MECHANICALLY RE-
TURNED TO THE NEUTRAL POSITION ONCE THE HYDRAULIC CYL-
INDER HAS REACHED THE END OF ITS TRAVEL. FAILURE TO DO SO
WILL RESULT IN THE HYDRAULIC CIRCUIT BEING PLACED UNDER
A STRAIN WHICH COULD RESULT IN OVERHEATING OF HYDRAU-
LICS AND DAMAGE TO TRACTOR HYDRAULIC COMPONENTS
AND/OR IMPLEMENT.
WARNING: HYDRAULIC FLUID UNDER PRESSURE CAN PENTRATE
THE SKIN OR EYES AND CAUSE SERIOUS INJURY, BLINDNESS OR
DEATH. FLUID LEAKS UNDER PRESSURE, MAY NOT BE VISIBLE.
LOOSEN CONNECTIONS SLOWLY, KEEPING HANDS AND FINGERS
CLEAR OF LOOSENED FITTINGS. USE A PIECE OF CARDBOARD
OR WOOD TO LOCATE LEAKS, DO NOT USE YOUR FINGERS OR
HANDS. WEAR SAFETY GOGGLES FOR EYE PROTECTION. IF ANY
FULID IS INJECTED INTO THE SKIN, SEEK MEDICAL ATTENTION IM-
MEDIATELY.
To Next Page
Loading...
Need help?
General
