SECTION V MAINTENANCE
Gearbox clutch
Every 150 hours: check the pedal’s free travel. This should be
approximately 25 mm (0,985 in).
Otherwise turn to one of our Authorized Service Workshops and have it
adjusted.
Rear and underside P.T.O. clutch
Periodically: operate the control and verify that engagement occurs
correctly.
Otherwise turn to one of our Authorized Service Workshops and have it
recalibrated.
View of tractor underside
1 - Front-wheel drive control lever
2 - Service brakes control
3 - Rear differential lock control
4 - Underside P.T.O. shaft
137
To Next Page
Loading...