SECTION I SAFETY/DECALS/SYMBOL
XXV
Damage to the ROPS
If the tractor has rolled over or the ROPS has been damaged (such as
striking an overhead object during transport), the ROPS must be replaced
to provide the original degree of protection.
After an accident, check for damage to the ROPS, operator’s seat, seat
belt and seat belt mountings.
Before you operate the tractor, replace all damaged parts.
DO NOT WELD, DRILL, BEND OR STRAIGHTEN THE ROPS.
To do so reduces the protection it offer
Cab
The safety cab has been designed for fitment to this series of tractor and
meets all the legal requirements of cab safety and noise levels.
The safety cab conforms to the various international safety standards. The
cab must NEVER be drilled, or modified to install accessories or
implements . Welding components to the cab or repairing damaged
components is NOT PERMITTED. DO NOT attach chains or ropes to the
main frame of the cab for pulling purposes.
If additional controls or displays are to be added to the operator’s area
contact your Dealer for information as to how this can best be done.
The ROPS cab together with the seat belt is effective in reducing injuries
during overturn accidents. Wearing the seat belt is an important part of this
protection.
–
Always wear your seat belt-adjusted snugly.
–
Check the seat belt for damage. A damaged seat belt must be re-
placed.
WARNING: IF THE TRACTOR HAS TO OPERATE IN AREAS WITH
RISK OF FALLING OBJECTS (LIKE IN MINES, ETC.), WHERE A FOPS
IS REQUIRED, PLEASE CONSIDER THAT YOUR TRACTOR,
EQUIPPED WITH ROPS SAFETY STRUCTURE (FRAME OR CAB), IS
NOT ALLOWED TO OPERATE IN THOSE AREAS.
To Next Page
Loading...
Need help?
General
