SECTION I SAFETY/DECALS/SYMBOL
XXX
Before applying pressure to the fuel or hydraulic system, be sure all
connections are tight and that lines, pipes, and hoses are not damaged.
Before disconnecting fuel or hydraulic lines, be sure to relieve all pressure.
Make sure that all hydraulic lines are correctly installed and not crossed.
Clean the Tractor
–
Keep work surfaces and engine compartments clean.
–
Before cleaning the machine, always lower implements to the ground,
place transmission in neutral or with the lowest gear engaged, if me-
chanical, engage the parking brake, shut off the engine and remove
the key.
–
Clean steps, pedals and floor. Remove grease or oil. Brush away dust
or mud. In winter, scrape away snow and ice. Remember - slippery
surfaces are dangerous.
–
Remove or put away tools, buckets, chains and hooks.
Protect the Environment
It is illegal to pollute drains,
water courses or soil. Use
authorised waste disposal
facilities, including civic amenity
sites and garages providing
facilities for disposal of used oil.
If in doubt, contact your local
authority for advice.
WARNING: LIQUID COOLING SYSTEMS BUILD UP PRESSURE AS
THE ENGINE GETS HOT. BEFORE REMOVING THE RADIATOR CAP,
STOP THE ENGINE AND LET THE SYSTEM COOL.
CHECK THE ENGINE COOLING SYSTEM AND ADD COOLANT AS
REQUIRED.
To Next Page
Loading...
Need help?
General
