•
Rear - central PTO .............................................41
•
Synchronized power take-off......................................42
•
Underside P.T.O. for control of implements mounted underside ...........43
•
Rear brakes...................................................44
•
Load sensing - mechanical lift.......................................45
•
Controls ......................................................46
•
Hydraulic system ...............................................50
•
Auxiliary hydraulic services control valve ..............................53
•
Nomenclature .................................................54
•
Types of auxiliary hydraulic service control valve ......................55
•
The controls...................................................56
•
Example connection and operation of a double-acting cylinder ...........58
•
Connection of an implement to the auxiliary
hydraulic service couplers ........................................59
•
Converting a control valve from double-acting to single-acting............62
•
Example of connection to a single-acting cylinder .....................63
•
Class “A” drawbar ................................................64
•
Towing hitch ....................................................65
•
Class “C” towing hitch ...........................................66
•
CEE towing hitch.................................................67
•
Three-point linkage ...............................................69
•
Adjustment of the telescopic stabilisers..............................70
•
Adjustment of the top link ........................................70
•
Adjustable vertical link...........................................71
•
Mid mount implements with lifting arms..............................72
•
Hydraulic front lift.................................................73
•
Bodywork.....................................................75
•
Safety frame ..................................................76
• Cab...........................................................78
•
GRAMMER MSG 83/8 type seat...................................79
•
Ventilation ....................................................80
•
Controls ......................................................80
•
Heating system ................................................81
•
Air conditioning ................................................83
•
Controls located in the cab roof lining ...............................85
•
Opening front window ...........................................86
•
Opening rear window ...........................................86
•
Cab roof light ..................................................87
•
Storage compartment ...........................................87
•
Digital quartz clock .............................................87
•
Active carbon air filter .............................................89
•
Cable channel for passing external implement control
cables into the cab .............................................90
•
Hazard warning triangle .........................................90
•
Screen wash liquid reservoir ......................................90
•
SECTION 4 - Wheels ...............................................91
•
Track adjustment ...............................................91
•
Tyre inflation pressures ..........................................92
•
Width of the front axle (without wheels)..............................93
•
Mechanical ratio (front wheel revolutions / rear wheel revolution)..........93
•
Width of rear axle (without wheels) .................................93
•
Row crop tires .................................................93
•
Running direction of tires.........................................94
•
Adjusting steering stops .........................................94
V