SAMES KREMLIN Cyclomix Evo - User Manual

SAMES KREMLIN Cyclomix Evo

169 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Instruction manual

DRT582165110

A - 2023/03

Cyclomix

®

Evo

Table of Contents

Questions and Answers

J
Joseph GonzalezAug 2, 2025
What to do if SAMES KREMLIN Industrial Equipment displays a B/A ratio error (low limit)?
- C
  Chad HarringtonAug 2, 2025
  If your SAMES KREMLIN Industrial Equipment displays a B/A ratio error indicating a low limit, there are several potential causes and solutions: - If the supply pressure of the B component is too low, increase the supply pressure of B. - Check the B/A ratio tolerance and adjust it if necessary, with a minimum of + /- 1%. - Examine the flowmeter and sensor to ensure they are operating correctly. Clean or replace them if needed.

Summary

Health and Safety Instructions

Equipment Marking and Compliance

Details ATEX/non-ATEX markings on boxes and nameplates, applicable standards, and directives.

Safe Operation and Precautions

Explains safety pictograms, precautions for use, personnel safety, PPE, and general warnings.

Installation and Maintenance Safety

Covers equipment integrity, warnings, installation rules, and maintenance safety recommendations.

Product Description and Features

Generalities and Component Functions

Overview of Cyclomix® Evo, its generalities, and functions of different components.

Box and Electronic Component Presentations

Detailed presentation of main, additional EVO+, and remote boxes, and electronic cards.

Design and Codification Principles

Explains principles of design, codification systems, and commercial designation.

Technical Features and Specifications

Cyclomix Evo Specifications

Lists key technical specs like machine type, pressure, flow rate, communication, and applications.

Physical Dimensions and Network Operation

Provides physical dimensions and explains network mode operation principles.

System Schematics and Connectivity

Electrical and Network Overviews

Covers electrical schematics for the main box and network overviews of system components.

Start-up and Installation

Tools and Installation Procedures

Lists required tools and details installation steps like feet mounting and connections.

Component Connections and Air Supply

Covers electrical, pneumatic, air supply, and flowmeter connections for various components.

Maintenance Procedures

Maintenance Summary and Schedule

Overview of maintenance procedures, frequencies, and schedules for equipment parts.

Preventive Maintenance Plan and Pressure Relief

Detailed preventive maintenance plan, including pressure relief procedure.

Replacement and EtherCAT Bus Setup

Procedures for component replacement and EtherCAT bus configuration.

Troubleshooting Guide

Error Identification and Resolution

Lists common errors (ratio, flow, trigger) with causes and remedies.

Document Appendices

Revision History

Records changes and revisions made to the document over time.

Declarations of Conformity

EU and UK declarations of conformity for the equipment, confirming compliance.

SAMES KREMLIN Cyclomix Evo Specifications

General

Brand	SAMES KREMLIN
Model	Cyclomix Evo
Category	Industrial Equipment
Language	English