23
Member of Exel group
DRT582165110
A - 2023/03
1.6.4. Check the delivered items
• Remove the Cyclomix
®
Evo from its packaging.
• Dispose of packaging properly. Comply with your local regulations..
• Check that the Cyclomix
®
Evo has not been damaged during transport.
• Immediately notify the carrier and Sames in writing of transportation damage.
• Protect the Cyclomix
®
Evo from further damage.
• Use the packing slip to verify the completeness of the delivery..
1.6.5. Storage
Our equipment must be stored in its original packaging.
In the event of prolonged storage, it is advisable to carry out preventive maintenance on all lubricants before
commissioning.
Storage before installation
Ambient storage temperature 0 / +50 °C.
• Protect the unit from dust, water runoff, moisture, vibration and shock.
• Do not remove the packaging until just before assembly.
Storage after installation
• Protect the unit from dust, water runoff, moisture and impact.
To Next Page
Loading...