SAMES KREMLIN Cyclomix Evo - Commercial Designation Principle of the Cyclomix Evo

49
Member of Exel group
DRT582165110
A - 2023/03
2.4.2. Commercial designation principle of the Cyclomix
®
Evo.
The commercial designation of a Cyclomix® Evo does not allow for a complete definition of the dosing unit, but it does
allow you to know the main characteristics.Example of codification for a 2 component machine:
Cyclomix
®
Evo 2KST 240 EX 1G A02FG24 B02FG24 A1
Example of codification for a 3 component machine:
Cyclomix
®
Evo 3KST 240 EX 2G A02FG24 B02FG24 C01FG24 A1
The material designation begins with the Cyclomix
®
Evo product name followed by the following information below.
• The first set of 4 characters identifies the number of components that can be managed by the Cyclomix
®
Evo
as well as the compatibility with the products.
• The second set of 3 characters identifies the maximum product pressure at the inlet to Cyclomix
®
Evo.
There is only one version with an admissible pressure of 240B.
• The third set of 2 characters identifies the directive to which the Cyclomix
®
Evo.
• The fourth set of 2 characters identifies the number of circuits managed by the Cyclomix
®
Evo.
2KST 2K standard 303
Cyclomix
®
Evo 2 components with color changers, flowmeters and injection
blocks are made of 303 stainless steel.
2KPH 2K PH
Cyclomix
®
Evo 2 components with color changers and flow meters on side A are
made of 303 stainless steel and side B of 316 stainless steel.
2KSS 2K 316
Cyclomix
®
Evo 2 components with color changers, flowmeters and injection
blocks are made of 316 stainless steel.
3KST 3K standard 303
Cyclomix
®
Evo 3 components with color changers, flowmeters and injection
blocks are made of 303 stainless steel.
3KPH 3K PH
Cyclomix
®
Evo 3 components with color changers and flowmeters on the A&C
side are made of 303 stainless steel and on the B side of 316 stainless steel.
3KSS 3K 316
Cyclomix® Evo 3 components with color changers, flowmeters and injection
blocks are made of 316 stainless steel.
CE CE no ATEX
Cyclomix
®
Evo built according to the European directive but the product board must be ins-
talled in a safe area
EX CE ATEX
Cyclomix
®
Evo is built according to the European directive and the product board can be ins-
talled in ATEX zone 1
1G 1 Circuit
The Cyclomix
®
Evo is configured with a single output circuit.
This means that there can be one or more guns, but all powered by the same circuit.
2G 2 Circuits
The Cyclomix
®
Evo is configured to manage 2 output circuits.
These 2 circuits will be managed for the flushing, priming and Potlife management phases.