SAMES KREMLIN Cyclomix Evo - Zoom Function on Ratio and Flow Rate; Adjusting the Ratio in Production

78
Member of Exel group
DRT582165110
A - 2023/03
2.5.15. Zoom function on ratio and flow rate
The Cyclomix
®
Evo allows you to zoom in on the actual ratio or the current flow rate while being a few meters away
from the cabinet.
To do this, simply press the value you wish to display.
2.5.16. Adjusting the ratio in production
It may happen that during production, for example in order to adjust the gloss level of the paint, that it is necessary
to slightly correct the mixing ratio.
To do this, simply press the ratio for 2 seconds to enter a new screen allowing you to adjust the percentage of
catalyst.
For security reasons, it is not possible to change this percentage by more than 10%.
This new target ratio will only be taken into account during the current production phase. This target ratio will take
on the value stored in the recipe parameters as soon as a flushing cycle is performed or a new recipe called.