66
Member of Exel group
DRT582165110
A - 2023/03
2.5.7. Production flushing
The production flushing is a flushing phase that can be configured for each recipe. This flushing phase consists of a
number of configurable steps. Up to 20 flushing steps can be configured per recipe.
Each flushing step will be defined by a strategy and parameters inherent to each strategy.
The production flushing can be started in 2 ways:
• Automatically when a new recipe is requested while a recipe is in progress.
• Manually by pressing the Production Flushing button on the recipe selection page.
2.5.7.1. Product strategy
This strategy allows to circulate product from one of the color
changers. It is possible to configure this cycle to measure a volume of
product or to circulate product for a defined time.
The different parameters to be filled in to define a flushing step are:
• The circuit to be cleaned..
• The product to be used.
• The expected volume or opening time of the product valve.
• The equipment through which the product is to be discharged.
To Next Page
Loading...