67
Member of Exel group
DRT582165110
A - 2023/03
The circuit
2 or 3 possible choices depending on the configuration:
• Machine and mixer.
• Gun hose 1.
• Gun hose 2.
If... Then...
If the circuit is defined as Machine and
Mixer.
Therefore, this flushing step will be systematically performed
regardless of the gun(s) used during the production phase.
production phase.
If the circuit is defined as Gun hose 1 So, this step will be performed only if the gun 1 has been used
during the production phase.
If the circuit is defined in Gun hose 2 So, this step will be performed only if the gun 2 has been used
during the production phase.
If the Cyclomix
®
Evo is defined with 2 guns.
Therefore, it is preferable to define a flushing step with the hose
gun 1 and a flushing step with the hose gun 2.
If no flushing step is set for a gun. Then it will not be possible to start production with this gun. When
selecting the gun, an error message will appear to inform the user
that no flushing step is defined for this gun.
To Next Page
Loading...