7
Member of Exel group
DRT582165110
A - 2023/03
1. Health and safety instructions
1.1. Configuration of the certified equipment
This manual defines the configuration of the certified equipment.
1.2. Marking
1.2.1. Marking of ATEX and non-ATEX boxes
Each device is marked with the name of the manufacturer, the reference of the device and the important information
for the use of the device: air pressure, electrical power.
This equipment has been designed in accordance with ATEX Directive 2014/34/EU and is intended for use in
use in area 1.
This equipment therefore complies with the following provisions:
• ATEX Directive (2014/34/EU): II 2 G - group II, category 2, gas).
• The EU Declaration of Conformity and the UKCA Declaration (specific to the UK market) are included in this
document as annexes in this document as appendices.