EasyManua.ls Logo

SAMES KREMLIN Cyclomix Evo - Page 17

SAMES KREMLIN Cyclomix Evo
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Member of Exel group
DRT582165110
A - 2023/03
Qualification of the staff
Interventions on the Cyclomix
®
Evo must only be carried out in accordance with the rules and regulations in force, by
trained and qualified personnel.
The following conditions must be met:
The personnel must have special skills and experience in the relevant technical field. This applies in particular
to maintenance and repair work on the Cyclomix
®
Evo devices.
The personnel must be familiar with the applicable standards, guidelines, accident prevention regulations and
operating conditions.
The personnel must have been authorized by the safety officer to perform the required tasks.
Personnel must be able to recognize and avoid potential hazards.
The required qualifications of the personnel are subject to different legal regulations depending on the site of
implementation. The owner must ensure compliance with applicable laws.
Qualified personnel must be familiar with the product safety data sheets that they will be required to use in the
operation of the Cyclomix
®
Evo.
Operation of the equipment
The manufacturer cannot be held responsible in case:
Personal injuries.
Of breakdowns.
Damage to equipment resulting from destruction.
Total or partial concealment or removal of the protecto
Imperative recommendations
Do not modify or alter the equipment.
Parts and accessories must be exclusively supplied or approved by Sames.
Exploitation of the implemented products
Given the diversity of products used by users and the impossibility of listing all the characteristics of chemical
substances, their interactions and their evolution over time, Sames cannot be held responsible:
The poor compatibility of the materials in contact,
Inherent risks to personnel and the environment,
Wear and tear, maladjustments, malfunctions of equipment or installations as well as the qualities of the
finished product.

Table of Contents