Samsung MS11 - Printing with PictBridge

ENGLISH
132132
PPiiccttBBrriiddggee 模模式式：： 使使用用 PPiiccttBBrriiddggee 功功能能列列印印
配備隨附的 USB 纜線以及支援 PictBridge 的印表機，舅可以在無須
連接至電腦的情況下直接列印舅的相片影像0
11.. 使使用用 UUSSBB 纜纜線線連連接接 MMiinniikkeett PPhhoottoo 與與支支
援援 PPiiccttBBrriiddggee 的的印印表表機機00
22.. 開開啓啓印印表表機機00
33.. 將將模模式式轉轉盤盤轉轉到到 PPiiccttBBrriiddggee 模模式式00
44.. 按按下下 [[PPOOWWEERR]] 按按瞿瞿以以開開啓啓 MMiinniikkeett
PPhhoottoo00
◆ 如果尙未進行 USB 連接，“Connect
USB Cable!”訊息將會顯示0
55.. 按按下下 [[SShhoorrttccuutt 22]] 按按瞿瞿以以設設定定日日期期//時時間間
壓壓印印選選項項00
◆ 每次按下 [Shortcut 2] 按瞿，將會在
Off< >-Date < >-Time < >-
Date&Time< > 中轉換0
66.. [[SShhoorrttccuutt 33]] 將將會會增增加加略略數數而而 [[SShhoorrttccuutt 44]] 將將減減少少
略略數數00
◆ 可能的範圍： 1~99
◆ 在 99 上再次按下 [Shortcut 3] 按瞿將會設定
爲 10
◆ 在 1 上再次按下 [Shortcut 4] 按瞿將會設定爲
990
77.. 按按下下 [[SShhoorrttccuutt 11]] 按按瞿瞿以以開開始始列列印印00
◆ 若要取消列印，請再次按下 [Shortcut 1] 按瞿0
88.. 完完成成後後，，拔拔下下纜纜線線00
[
警警告告
]
✤ 此功能僅可在支援 PictBridge 的印表機上操作0
[
附附註註
]
✤ 略數與壓印選項可以在選單中設定0 按下 [MENU] 按瞿可存取該
功能0
✤ 如需關於列印的資訊，請參閱印表機的使用手冊0
✤ 根據印表機而定，可能會出現列印故障0 在此情況下，請直接將
JPEG 圭案下載到電腦然後列印0
✤ 根據印表機，日期和時間壓印選項可能不會被支援0 在此情況下，
日期和時間選單將不會顯示0
使使用用 PPiiccttBBrriiddggee 功功能能列列印印
PictBridge Mode: Printing with PictBridge
With the provided USB cable and a PictBridge-supporting printer, you
can print your photo images directly without connecting to a PC.
1. Connect the Miniket photo and the
PictBridge supporting printer with a USB
cable.
2. Turn on the printer.
3. Turn the Mode Dial to PictBridge mode.
4. Press the [POWER] button to turn on the
Miniket Photo.
◆ If the USB connection is not made, the
message “Connect USB Cable!”
appears.
5. Press the [Shortcut 2] button to set the
date / time imprint option.
◆ Each press of the [Shortcut 2] button cycles
through Off< >-Date < >-Time < >-
Date&Time< >.
6. [Shortcut 3] button will increase the number of
copies, while the [Shortcut 4] button will decrease
the number of copies.
◆ Range of possibilities: 1 ~ 99
◆ Pressing the [Shortcut 3] button on 99 will set to 1.
◆ Pressing the [Shortcut 4] button on 1 will set to 99.
7. Press the [Shortcut 1] button to begin printing.
◆ To cancel printing, press the [Shortcut 1] button again.
8. When finished, disconnect the USB Cable.
[ Warning ]
✤ This function works only with printers that support PictBridge.
[ Notes ]
✤ Number of copies and imprint options can be set in the menu.
Press the [MENU] button to access the function.
✤ For printing information, refer to the User's manual of the printer.
✤ Depending on the printer, printing failure may occur. In this
case,download JPEG files directly to the PC and print them.
✤ Depending on the printer, date and time imprint option may not be
supported. In this case, date and time menu will not be displayed.
Printing with PictBridge