ENGLISH
3838
舅可以設定圭案編號以便使央們在每次格式化小型 SD 賓時重設，或
使央們連續向上計數0
11..
將將模模式式轉轉盤盤轉轉到到
SSeettttiinnggss
模模式式00
22..
按按下下 [[PPOOWWEERR]] 按按瞿瞿以以開開啓啓 MMiinniikkeett
PPhhoottoo00
33..
向向左左或或向向右右移移動動搖搖桿桿選選取取 <<FFiillee
NNoo..>>00
44..
向向上上或或向向下下移移動動搖搖桿桿選選取取所所要要的的選選項項，，然然後後按按下下搖搖
桿桿 ((OOKK))
按按瞿瞿00
◆
<<RReesseett>>
： 當儲存記憶體格式化時，圭案編
號將會回到其預設値 (100-0001)0
◆
<<SSeerriieess>>
：記憶賓之間的編號是連續的，因
此新的小型 SD 賓上指定的第一個圭案編號，
會比上一個小型 SD 賓上指定的前一個圭案編
號大 1 號0
55..
完完成成設設定定後後，，將將模模式式轉轉盤盤轉轉到到所所要要的的模模式式00
[
附附註註
]
✤
將 <File No.> 設定爲 <Series> 時，每個圭案將會指定不同的
編號以避免圭名重複0 這樣就可以在 PC 上方便地管理舅的圭案0
設設定定圭圭案案編編號號功功能能
設設定定 MMiinniikkeett
PPhhoottoo：： 設設定定記記憶憶體體
You can set the file numbers so that they reset each time the mini SD
card is formatted, or so that they count up continuously.
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket
Photo.
3. Select <File No.> by moving the joystick left /
right.
4. Select the desired option by moving the
joystick up / down and then press the joystick
(OK).
◆ <Reset>: When the storage memory is
formatted, the file number goes back to its
default value (100-0001).
◆ <Series>: Numbering is continuous between the
mini SD cards, so that the first file number
assigned on a new mini SD card is 1 more than the last file
number assigned on the previous mini SD card.
5. After you finish setting, turn the Mode Dial to the desired
mode.
[ Note ]
✤
When you set <File No.> to <Series>, each file is assigned with a
different number so as to avoid duplicating file names. It is
convenient when you want to manage your files on a PC.
Setting the File No. Function
Setting the Miniket Photo :
Setting Memory
4
To Next Page
Loading...
