6969
ENGLISH
PPhhoottoo 模模式式：： 設設定定拍拍攝攝選選項項
設設定定白白平平衡衡
白平衡用於校準圖片以便在不同照明條件下顯示正確色彩0 建議
在進行任何錄製之前設定白平衡0
11..
將將模模式式轉轉盤盤轉轉到到
PPhhoottoo
模模式式00
22..
按按下下 [[PPOOWWEERR]] 按按瞿瞿以以開開啓啓 MMiinniikkeett
PPhhoottoo00
33..
按按下下 [[MMEENNUU]]
按按瞿瞿00
◆ 選單螢幕將會顯示0
44..
向向左左或或向向右右移移動動搖搖桿桿選選取取 <<WWhhiittee
BBaallaannccee>>00
55..
向向上上或或向向下下移移動動搖搖桿桿以以選選取取選選項項，，然然後後按按搖搖桿桿 ((OOKK))
按按
瞿瞿00
◆ 若要設定 Custom WB，請將白色物體定位在觀景
鎖的中央位置0 按下搖桿 (OK) 按瞿以設定，或按
下 [MENU] 按瞿以取消橙結束選單螢幕0 在設定
Custom WB 之後拍攝的相片將會受到該設定値的
影響0
66.. 按按 [[MMEENNUU]]
按按瞿瞿以以結結束束選選單單00
◆ 螢幕上將顯示一個標示所選白平衡的圖示0
◆
如果選擇 <Auto>，將不會顯示任何圖示0
[
附附註註
]
✤ 在一般的戶外拍攝中，<Auto> 設定將可以讓使用者獲
得最佳效果0
✤ 當照明條件改變時，請在拍攝前設定適當的白平衡0
✤ 用於 <Custom WB> 的物體必須是白色的0 否則，
色彩平衡將會不自然0
✤ 如需關於在 Scene 模式中設定 White Balance 的資訊，請參閱第 72 頁0
✤ 當選單螢幕顯示時，按 [Record/Stop] 按瞿將可以結束選單0
根據拍攝環境自動設定0
根據白天/室內/ 室外照明調整色彩0
舅可以在無法獲得日光作爲直接照明時
選取此選項，例如稍微多雲的陰天或非
常多雲的陰天0
適用於鹵光燈或 3 波長照明環境0
適用於螢光燈照明環境0
適用於白熾燈照明環境0
舅可以根據拍攝環境調整舅要的白
平衡0
AAuuttoo
DDaayylliigghhtt
CClloouuddyy
FFlluuoorreesscceenntt
HH
FFlluuoorreesscceenntt
LL
TTuunnggsstteenn
CCuussttoomm
WWBB
Photo Mode :
Setting the Capturing Options
Setting the White Balance
The White Balance allows calibration of the picture for
accurate color display in different lighting conditions.
It is recommended to set the white balance prior to any recording.
1. Turn the Mode Dial to Photo mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Press the [MENU] button.
◆ Menu screen appears.
4. Move the joystick left / right to select <White Balance>.
5. Select an option by moving the joystick up / down, and
then press the joystick (OK).
◆ To set the Custom WB, frame the white subject on
the center. Press the joystick (OK) to set, or press the
[MENU] button to cancel and exit to Menu screen. Photos
captured after the Custom WB set will be affected by the
setting.
6. Press the [MENU] button to exit the menu.
◆ An icon indicating the selected white balance appears
on the screen.
◆ If <Auto> is selected, no icon will be displayed.
[ Notes ]
✤ In general outdoors picture taking, <Auto> setting will allow
users to have best results.
✤ As the lighting condition changes, set the appropriate white
balance before taking a picture.
✤
The subject used for <Custom WB> should be white. If not,
the color balance will not be natural.
✤
Regarding White Balance setting in Scene modes, refer to page 72.
✤ While the menu screen is displayed, pressing the [Record / Stop] button will
exit the menu.
Automatically sets according to the shooting
environment.
Adjusts the color according to daylight/indoor,
outdoor light
You can select this when you cannot have
daylight as a direct light, such as when it is
partly-cloudy or cloudy.
Suitable in a halogen or 3-wavelength light
environment.
Suitable for a fluorescent light environment.
Suitable for an incandescent light
environment.
You can adjust the white balance as you wish
based on the shooting environment.
Auto
Daylight
Cloudy
Fluorescent H
Fluorescent L
Tungsten
Custom WB
4
5
6
To Next Page
Loading...
