Samsung MS11 - Inserting; Ejecting a mini SD card (Optional Accessory)

3333
ENGLISH
使使用用入入門門
揷揷入入//退退出出小小型型 SSDD 賓賓（（可可選選購購的的配配件件））
本産品配備一個內部記憶體，而小型 SD 賓是一個可選購的配件，橙
不包含在封裝中0
揷揷入入小小型型 SSDD 賓賓
11.. 滑滑動動底底部部 [[OOPPEENN]] 開開關關，，打打開開護護蓋蓋00
◆ 將 [OPEN] 開關滑向圖中所示的方向
(1) 直到央停止不動0 然後打開蓋子
(2)0
22.. 按按照照圖圖中中所所示示的的方方向向，，將將小小型型 SSDD 賓賓揷揷入入揷揷
槽槽直直到到輕輕輕輕賓賓入入到到位位00
◆ 小型 SD 賓的終端將會朝下而 LCD 顯
示器朝上0
退退出出小小型型 SSDD 賓賓
11.. 輕輕輕輕地地將將小小型型 SSDD 賓賓向向內內推推使使央央彈彈出出00
22.. 將將小小型型 SSDD 賓賓拉拉出出揷揷槽槽然然後後關關閉閉護護蓋蓋00
[
附附註註
]
✤ 請確定使用 Miniket Photo 來格式化小型 SD 賓0
Getting Started
Inserting / Ejecting a mini SD card (Optional Accessory)
This product is equipped with a internal memory and the mini SD card
is an optional accessory which is not provided with the package.
Inserting a mini SD card
1. Open Cover by sliding the [OPEN] switch
on the bottom side.
◆ Slide the [OPEN] switch in the direction of
(1) as shown in the diagram until it stops.
Then open the lid.(2)
2. Insert a mini SD card into the slot until it
softly clicks in the direction of the arrow
shown in the diagram.
◆ The mini SD card terminals will face down
while the LCD monitor faces up.
Ejecting a mini SD card
1. Slightly push the mini SD card inwards to
pop it out.
2. Pull the mini SD card out of the slot and
close the Cover.
[ Note ]
✤ Make sure to format a mini SD card using the Miniket Photo.
OPEN
@
!
M
ENU
Cover
Cover