4141
ENGLISH
設設定定 MMiinniikkeett
PPhhoottoo：： 調調整整 LLCCDD
顯顯示示器器
調調整整 LLCCDD
亮亮度度
可調整 LCD 顯示器的亮度，以補償周圍環境的光線條件0
11..
將將模模式式轉轉盤盤轉轉到到
SSeettttiinnggss
模模式式00
22..
按按下下 [[PPOOWWEERR]] 按按瞿瞿以以開開啓啓 MMiinniikkeett
PPhhoottoo00
33..
向向左左或或向向右右移移動動搖搖桿桿選選取取 <<LLCCDD
BBrriigghhttnneessss>>00
44..
向向上上或或向向下下移移動動搖搖桿桿以以調調整整亮亮度度，，然然後後按按搖搖桿桿
((OOKK))
按按瞿瞿00
◆ 向上移動搖桿將會加亮螢幕，而向下移動搖桿
則會使螢幕變暗0
◆ 亮度範圍： 舅可以在 00~31的步調之間調
整亮度0
55..
完完成成調調整整後後，，將將模模式式轉轉盤盤轉轉到到所所要要的的模模式式00
[
附附註註
]
✤ 較亮的 LCD 螢幕設定將會消耗較多的電池電量0
✤ 當環境照明太亮和顯示器難以淸楚檢視時，請調整 LCD 亮度0
✤ LCD 亮度不會影響已儲存影像的亮度0
Setting the Miniket Photo :
Adjusting the LCD Monitor
Adjusting the LCD Brightness
You can adjust the brightness of the LCD monitor to compensate for
ambient lighting conditions.
1 Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket
Photo.
3. Select <LCD Brightness> by moving the joystick
left / right.
4. Adjust the brightness by moving the joystick
up / down then press the joystick(OK).
◆ Moving the joystick up will brighten the screen
whereas moving it down will darken the screen.
◆ Brightness range: You can adjust the brightness
between 00 ~ 31 steps.
5. After you finish adjusting, turn the Mode Dial to
the desired mode.
[ Notes ]
✤ A Brighter LCD screen setting consumes more battery power.
✤ Adjust the LCD brightness when the ambient lighting is too bright
and the monitor is hard to see.
✤ LCD Brightness does not affect the brightness of images to be
stored.
3
4
To Next Page