ENGLISH
4646
舅可以將「榛聲」設定爲開啓/關閉0 開啓時，每次按下按瞿時將會發出
一個榛聲0
11..
將將模模式式轉轉盤盤轉轉到到
SSeettttiinnggss
模模式式00
22..
按按下下 [[PPOOWWEERR]] 按按瞿瞿以以開開啓啓 MMiinniikkeett
PPhhoottoo00
33..
向向左左或或向向右右移移動動搖搖桿桿選選取取 <<BBeeeepp
SSoouunndd>>00
44..
向向上上或或向向下下移移動動搖搖桿桿選選取取所所要要的的選選項項，，然然後後按按下下搖搖
桿桿 ((OOKK))
按按瞿瞿00
◆
<<OOffff>>
：關閉榛聲0
◆
<<OOnn>>
：開啓榛聲0
55..
完完成成設設定定後後，，將將模模式式轉轉盤盤轉轉到到所所要要的的模模式式00
[
附附註註
]
✤
將耳機或聲訊/視訊纜線連接到 Miniket Photo 時，
<Beep Sound> 功能將無法操作0
設設定定 MMiinniikkeett
PPhhoottoo：： 設設定定系系統統
設設定定榛榛聲聲
You can set the beep sound to on/off. When on, a beep will sound
every time a button is pressed.
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket
Photo.
3. Select <Beep Sound> by moving the joystick
left / right.
4. Select the desired option by moving the joystick
up / down and then press the joystick (OK).
◆ <Off>: Turn the beep sound off.
◆ <On>: Turn the beep sound on.
5. After you finish setting, turn the Mode Dial to the desired
mode.
[ Note ]
✤
When the earphones or Audio / Video cable is connected to the
Miniket Photo, the <Beep Sound> function will not operate.
Setting the Miniket Photo :
Setting the System
Setting the Beep Sound
4
To Next Page
Loading...
