Santerno Sinus M - Important User Information; The purpose of this manual is to provide the user with the necessary information to install, program, start up and maintain the SINUS M series inverter.; To assure successful installation and operation, the material presented must be thoroughly read and understood before proceeding.; This manual contains:

6
Important User Information
 The purpose of this manual is to provide the user with the necessary information to install,
program, start up and maintain the SINUS M series inverter.
 To assure successful installation and operation, the material presented must be thoroughly read
and understood before proceeding.
 This manual contains:
Chapter Title Description
1
Basic information &
precautions
Provides general information and precautions for safe use of
the Sinus M series inverter.
2
Installation
Provides instructions on how to install the Sinus M inverter.
3 Wiring Provides instructions on how to wire the Sinus M inverter.
4
Basic configuration
Describes how to connect the optional peripheral devices to
the inverter.
5
Programming
keypad
Illustrates keypad features and display.
6
Basic operation
Provides instructions for quick start of the inverter.
7
Function list
Parameter values are listed.
8
Control block
diagram
Shows control flow to help users easily understand operation
mode.
9
Basic functions
Provides information for basic functions in the Sinus M
10
Advanced functions
Indicates advanced functions used for system application.
11
Monitoring
Gives information on the operating status and fault
information.
12
Protective functions
Outlines protective functions of the Sinus M.
13
RS 485
Provides specification of RS485 communication.
14
Troubleshooting &
maintenance
Defines the various inverter faults and the appropriate action
to take as well as general troubleshooting information.
15
Specifications
Gives information on Input/Output rating, control type and
more details of the Sinus M inverter.
16
Options
Explains options including Remote keypad, Conduit kits,
EMC filters, DB resistors.
17 EC Declaration of
Conformity
Contains the Manufacturer’s certification stating that the
equipment is compliant to EC Directives. The certification
statement also contains the technical standards applied.